.svg?11002)
Rimpact CX 700c/29 Insert Set 44MM Valves
Introducing the Rimpact CX, designed specifically for Cyclo-Cross racing. At a mere 55 grams, it’s less than half the weight of competing inserts. The CX boasts a dual-density design paired with Rimpact Original Foam for maximum protection without the extra weight. This innovative construction means you don’t have to compromise on traction, support, or protection, allowing you to focus solely on the race ahead. Its optimized shape and weight distribution enhance tyre stability, ensuring you remain in control even on the most challenging courses.
Whether you’re a seasoned pro or new to cyclo-cross, the Rimpact CX is the missing piece to elevate your performance. Its unparalleled impact absorption reduces the risk of flats and crashes, giving you the confidence to push your limits. In the event of a flat, the CX allows you to continue riding without losing much time or risking the tyre unseating.
With the Rimpact CX, you can run lower pressures on clincher tyres to gain more traction and compete more evenly against tubular tyres, without the fear of blowouts.
This insert is specifically designed for UCI spec CX tyres (33c) but is compatible with rims with an inner diameter of 17mm to 25mm and tyre widths from 33c to 45c. Please note that fitting becomes increasingly difficult with narrower rims. The diameter is 700c. For those running 650b, we recommend checking out our Gravel/XC inserts.
While Hookless Rims are compatible, it’s important to note that running close to the minimum or maximum pressures recommended by the rim and tyre manufacturer increases the risk of blowouts, due to the nature of the hookless design. For more information, please contact Rimpact.
To ensure proper coverage, use about 25% more sealant than recommended on the bottle. Our inserts are closed-cell and cannot absorb liquid, but some sealant will cling to the outside of the insert, requiring a slightly higher dosage. Sealant can be injected through Rimpact Valves or poured directly into the tyre.
Each insert weighs approximately 55g. Please follow the installation instructions on our website before fitting or removing the insert.
Disclaimer: It is not recommended to run air pressures outside of those recommended by the tyre manufacturer, as this may result in injury or premature bicycle failure. Rimpact does not accept responsibility for misuse of the insert or improper installation. Rimpact Inserts are designed to work WITH Rimpact Insert Compatible Valves.
Not included: Tyres, Wheelset.
Contents Per Pack:
- 2x CX Tyre Inserts.
- 2x 44mm, 55mm Rimpact Insert Compatible Valves or Peaty’s Valves.
- 4x Die Cut Rim Decals.
Category Tyre Liners
Specification
- 30mm Wide
- Compatible with 17mm - 25mm Rims
- Compatible with 33c ” 45c Tyres
- 55g per 29”�/700c
Rimpact CX 700c/29 Insert Set 44MM Valves
Introducing the Rimpact CX, designed specifically for Cyclo-Cross racing. At a mere 55 grams, it’s less than half the weight of competing inserts. The CX boasts a dual-density design paired with Rimpact Original Foam for maximum protection without the extra weight. This innovative construction means you don’t have to compromise on traction, support, or protection, allowing you to focus solely on the race ahead. Its optimized shape and weight distribution enhance tyre stability, ensuring you remain in control even on the most challenging courses.
Whether you’re a seasoned pro or new to cyclo-cross, the Rimpact CX is the missing piece to elevate your performance. Its unparalleled impact absorption reduces the risk of flats and crashes, giving you the confidence to push your limits. In the event of a flat, the CX allows you to continue riding without losing much time or risking the tyre unseating.
With the Rimpact CX, you can run lower pressures on clincher tyres to gain more traction and compete more evenly against tubular tyres, without the fear of blowouts.
This insert is specifically designed for UCI spec CX tyres (33c) but is compatible with rims with an inner diameter of 17mm to 25mm and tyre widths from 33c to 45c. Please note that fitting becomes increasingly difficult with narrower rims. The diameter is 700c. For those running 650b, we recommend checking out our Gravel/XC inserts.
While Hookless Rims are compatible, it’s important to note that running close to the minimum or maximum pressures recommended by the rim and tyre manufacturer increases the risk of blowouts, due to the nature of the hookless design. For more information, please contact Rimpact.
To ensure proper coverage, use about 25% more sealant than recommended on the bottle. Our inserts are closed-cell and cannot absorb liquid, but some sealant will cling to the outside of the insert, requiring a slightly higher dosage. Sealant can be injected through Rimpact Valves or poured directly into the tyre.
Each insert weighs approximately 55g. Please follow the installation instructions on our website before fitting or removing the insert.
Disclaimer: It is not recommended to run air pressures outside of those recommended by the tyre manufacturer, as this may result in injury or premature bicycle failure. Rimpact does not accept responsibility for misuse of the insert or improper installation. Rimpact Inserts are designed to work WITH Rimpact Insert Compatible Valves.
Not included: Tyres, Wheelset.
Contents Per Pack:
- 2x CX Tyre Inserts.
- 2x 44mm, 55mm Rimpact Insert Compatible Valves or Peaty’s Valves.
- 4x Die Cut Rim Decals.
Category Tyre Liners
Specification
- 30mm Wide
- Compatible with 17mm - 25mm Rims
- Compatible with 33c ” 45c Tyres
- 55g per 29”�/700c