Cyclus Tools Snap.In Extractor Pressfit - SN.91-P
- CYCLUS TOOLS sanp.in bearing puller tool.
- With the snap.in extractor you can pull oout press-fit bearings from the bearing cups as well as bottom bracket cups from the bottom bracket housing.
- The extractor is suitable for bearings with an inner diameter of 22-30 mm.
- The outer diameter of the bearing shells may be max. 45 mm.
- Not suitable for OS-Press-Fit cups BB.386 (86,5×46)
- When using the extractor, always pay attention to the correct position of the extractor claws behind the bearing / bearing cup to be removed.
- When removing, depending on the diameter of the bearings, use the enclosed adapter ring.
- To use the Press-Fit extractor you need the snap.in tool holder SN.50-W. (code 7202750)
Category Press Fit Tools
Cyclus Tools Snap.In Extractor Pressfit - SN.91-P
- CYCLUS TOOLS sanp.in bearing puller tool.
- With the snap.in extractor you can pull oout press-fit bearings from the bearing cups as well as bottom bracket cups from the bottom bracket housing.
- The extractor is suitable for bearings with an inner diameter of 22-30 mm.
- The outer diameter of the bearing shells may be max. 45 mm.
- Not suitable for OS-Press-Fit cups BB.386 (86,5×46)
- When using the extractor, always pay attention to the correct position of the extractor claws behind the bearing / bearing cup to be removed.
- When removing, depending on the diameter of the bearings, use the enclosed adapter ring.
- To use the Press-Fit extractor you need the snap.in tool holder SN.50-W. (code 7202750)
Category Press Fit Tools